Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for San Diego Homeowners
Gate repair in San Diego means fixing the steel, wood, or wrought iron structure that protects your driveway and the electronic operator that moves it. A gate that won’t open traps you at home, and one that won’t close leaves your property exposed to Ocean Beach fog, Coronado salt air, and city street traffic. Calder Gate Repair San Diego has handled thousands of gate failures since 2009, from broken weld joints on Rancho Santa Fe estates to dead opener motors in normal single-family driveways across Clairemont. We answer the phone 24/7 at (619) 541-7844, send a background-checked technician with a live tracking link, and put the price in writing before anything gets touched.
Driveway Gate Repair
Driveway gate repair covers the full mechanical and electrical system that opens and closes the gate at your home’s entrance. You need it when your gate sags, scrapes the driveway, stops halfway, makes a grinding sound, or refuses to respond to the remote. Calder Gate Repair San Diego sends a tech who inspects the hinges, the motor, the chain or belt, the photo eyes, and the control board, then hands you a written quote before starting. Most driveway gate repairs in San Diego run $185 to $485 before parts, depending on whether it’s a mechanical fix or an opener failure, and every job includes the 365-Day Done Right Promise with a free second visit if the repair fails within a year.
Sagging or Scraping Gates
Steel and iron driveway gates weigh 300 to 800 pounds, and after years of coastal humidity and daily cycles, hinge brackets loosen and the gate leans. We perform Gate Realignment, reinforce, or replace the hinge hardware and adjust the travel path so the gate clears the concrete cleanly.
Driveway Opener Failures
When the opener hums but nothing moves, or the remote does nothing at all, the problem is usually a capacitor, a limit switch, or a burned control board. We carry replacement parts for LiftMaster, FAAC, and Viking openers so most repairs finish the same day.
Styles & brands we work with
Gate Welding
Gate welding re-fuses broken steel or iron joints so the gate regains its original structural strength. You need it when you see a cracked weld at a hinge plate, a snapped picket, or a corner that’s pulling apart from metal fatigue. Calder Gate Repair San Diego sends a certified welder who grinds the broken area clean, lays a full-penetration weld, and matches the finish so the repair doesn’t look like a patch job. Gate welding in San Diego typically runs $150 to $450 depending on the number of weld points and whether we need to remove the gate or work in place, and you get a written price before we strike an arc.
Cracked Hinge Welds
Hinge & Post Repair addresses how hinge plates take the full load of the gate every time it cycles, and coastal moisture accelerates cracking at those joints. We weld the plate back with proper penetration, add a gusset where the design allows, and repaint or powder-coat match the repair.
Broken Pickets and Rails
Vehicle strikes and rust thinning cause pickets to snap at the bottom rail. We cut out the damaged section, weld in a matched replacement, and grind the seam smooth so the repair blends into the surrounding steel.
Commercial Gate Repair
Commercial gate repair handles the heavier gates, operators, and access systems found at apartment complexes, HOAs, storage facilities, and business parks across San Diego. You need it when a slide gate binds on its track, a swing gate hits a bollard, or a keypad stops accepting codes and tenants can’t get through. Calder Gate Repair San Diego responds to commercial calls with techs who understand traffic-rated equipment and the liability that comes with a gate that fails open or closed. Commercial gate repair in San Diego typically runs $250 to $800 for common mechanical or electrical fixes, with a written quote before any work and a full report after, and our 365-Day Done Right Promise applies to every commercial job we take.
Slide and Cantilever Tracks
Commercial slide gates ride steel wheels on a track that collects dirt, debris, and rust from irrigation overspray. We clean, re-level, and replace damaged wheels, then adjust the rack and pinion so the gate glides instead of shuddering.
Access Control Integration
Keypads, telephone entry systems, and loop detectors fail more often than the gates they control. We test the full access chain, from the call box to the circuit board, and replace only the failed component so you’re not paying for parts you don’t need.
Iron Gate Repair
Iron gate repair addresses the rust, corrosion, and structural fatigue that affects wrought iron and cast iron gates in San Diego’s marine air. You need it when orange streaks appear beneath the paint, the gate feels loose at the hinges, or a decorative scroll has rusted through. Calder Gate Repair San Diego treats iron with the respect it deserves: we neutralize the rust, weld in matched replacement steel where sections have failed, and apply a finish that stands up to Pacific moisture. Iron gate repair in San Diego usually runs $175 to $525 depending on the extent of rust damage and the number of sections needing replacement, quoted upfront in writing before any work begins.
Rust Treatment and Prevention
Rust never sleeps, especially within two miles of the coast where your gate lives in salt-laden air. We sandblast or wire-wheel the affected areas, apply a rust-inhibiting primer, and finish with an industrial enamel that extends the gate’s life by years rather than months.
Decorative Scroll Replacement
Wrought iron gates often include thin decorative scrolls that rust through years before the main frame shows wear. We fabricate replacement scrolls to match the original design and weld them in without disturbing the surrounding finish.
Sliding Gate Repair
Sliding gate repair covers cantilever and track-style gates that move horizontally instead of swinging on hinges. You need it when a slide gate jerks, stalls mid-travel, jumps the track, or grinds against the guide rollers. Calder Gate Repair San Diego diagnoses slide gate problems from the wheels to the gear rack, because a misaligned rack will destroy a new motor just as fast as the old one. Sliding gate repair in San Diego generally costs $195 to $550 depending on the repair type, and we quote the price in writing before the first bolt comes out, so there’s never a surprise at the end of the job.
Wheel and Roller Replacement
Slide gates ride on sealed bearings that eventually seize or develop flat spots, making the gate lurch instead of glide. We replace worn wheels with the correct load-rated parts and adjust the gate height so the weight sits evenly across all rollers.
Rack and Pinion Alignment
The steel rack bolted to your gate meshes with the operator’s drive gear, and when it sags or fills with grit, the motor fights the gate every cycle. We straighten or replace the rack, set the gear mesh to the correct tolerance, and test the gate through 20 full cycles before we call it done.
Wrought Iron Gate Repair
Wrought iron gate repair focuses on the decorative and structural ironwork on driveway gates, pedestrian gates, and estate entrances throughout San Diego. You need it when the gate’s pickets are loose, the frame corners show stress cracks, or the finials on top have rusted to points that could snag a hand. Calder Gate Repair San Diego has the fabrication capability to match existing picket profiles and scrollwork, so a repaired section is indistinguishable from the original. Wrought iron gate repair in San Diego typically runs $200 to $600 depending on how much ironwork needs replacement, and the price is always on paper before we begin, with the 365-Day Done Right Promise covering every repair.
Picket Straightening and Replacement
Kids climbing the gate, delivery trucks clipping a corner, or simply decades of wind load bend pickets out of line. We straighten mild bends cold and replace severely damaged pickets with new steel that matches the original diameter and spacing.
Frame Reinforcement
Wrought iron frames flex every time the gate moves, and older gates often lack diagonal bracing, which lets the frame rack and the welds crack. We add or repair internal bracing, then re-weld the joints so the gate resists twisting for another 20 years.
Metal Gate Repair
Metal gate repair is the broad category for gate structures built from steel, aluminum, or a combination of both. You need it for dents, broken welds, seized hinges, bent frames, or any damage that prevents the gate from sealing properly against its stop. Calder Gate Repair San Diego repairs both galvanized steel and powder-coated aluminum gates, and we adjust our welding and finishing approach to the specific metal so you don’t get a repair that rusts out in six months. Metal gate repair in San Diego costs between $150 and $500 for most common jobs, quoted in writing before any work starts, and we’re happy to show you the damage before we fix it.
Aluminum Frame Repairs
Aluminum gates dent easily and their welds fatigue, but they can’t be welded with steel filler without creating a corrosion battery. We use aluminum-specific welding wire and techniques, then refinish the area to match the original anodized or powder-coated surface.
Post Re-setting
When a steel gate post leans, every adjustment to the gate is a band-aid until the post itself is upright. We excavate around the base, true the post with a level, and reset it in high-strength concrete, then re-hang the gate so it opens and closes with proper clearance.
Wood Gate Repair
Wood gate repair fixes sagging, rotting, and failed hardware on wooden driveway, garden, and side-yard gates throughout San Diego. You need it when a wood gate drags on the ground, the frame is soft where the hinges mount, or the gate has twisted so badly the latch won’t catch. Calder Gate Repair San Diego replaces rotten stiles, upgrades weak frames with steel corner brackets, and installs proper tension rods that let you true the gate as the wood moves with San Diego’s wet winters and dry summers. Wood gate repair in San Diego typically runs $160 to $420 depending on the extent of rot and hardware upgrades, always quoted in writing before the work begins.
Frame and Stile Replacement
Most wood gate failures happen at the hinge-side stile, where moisture wicks into the wood through the fastener holes. We cut out the rotted section, install pressure-treated replacement stock, and re-mount the hinges with through-bolts instead of lag screws so the repair lasts.
Hardware Upgrades
Builder-grade hinges and latches rust and sag within a few years, especially on gates that face the ocean, so Lock Repair is often needed. We install heavy-gauge, powder-coated hardware with adjustable tension so the gate swings true and latches positively every time.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Calder Gate Repair San Diego is factory-familiar with FAAC, BFT, Linear, and Viking opener systems, and we stock common parts for all four brands on our service vans. That means we don’t have to order a capacitor or a limit switch and come back a week later: we have the part, we know the wiring, and we fix it the same visit.
FAAC hydraulic operators are common on the heavy wrought iron gates in older San Diego neighborhoods like Mission Hills and Kensington. BFT gear-driven operators show up on mid-range residential installs. Linear dominates the contractor market, and Viking handles a lot of the commercial swing gates we see near Miramar. Wherever your gate came from, our techs have the diagnostic tools and the parts to bring it back to life, and if you have a brand that’s harder to find parts for, we’ll source them quickly and keep you posted on the timing.
Signs You Need a Pro Right Now
- Your gate opens but won’t close. This is a safety sensor or limit switch problem in most cases, and it means your property is unsecured. A misaligned photo eye is a $75 fix, but ignoring it invites a much bigger repair bill.
- The gate slams or shudders at the end of travel. Worn limit switches or missing mechanical stops let the gate crash into the end position every cycle. That shock load cracks welds and shortens opener life dramatically.
- Your remote works sometimes but not others. Intermittent operation usually points to a failing control board or a weak capacitor in the opener. Waiting until it dies completely turns a $200 part into a full system replacement.
- You can hear the motor running but the gate doesn’t move. The drive chain, belt, or gear has likely stripped or disconnected. Running the motor in this state burns it out fast, so shut the switch off and call us at (619) 541-7844.
- The gate leans or drags on one side. A sagging gate puts massive strain on the opener every time it cycles. The longer it runs misaligned, the more components wear out, turning a simple hinge repair into a full hardware replacement.
Our Process, Step by Step
- 1
You call (619) 541-7844. A live person answers, day or night. We ask what the gate is doing wrong, which brand of opener you have, and when you’d like us to arrive. You get a confirmation text with a tracking link the moment the tech is dispatched.
- 2
Your tech arrives on time and in uniform. Background-checked, marked vehicle, shoe covers if we’re walking through the house. We walk the gate through its full cycle, test the remote, and listen to the motor before we touch anything.
- 3
You get a written diagnosis and price. We show you exactly what’s wrong, which parts need replacing, and what the repair costs. The number we put on paper is the number on your invoice, and no work starts until you approve it.
- 4
We complete the repair and test everything. We cycle the gate multiple times, re-check the safety sensors, and verify the remote and keypad work from the distances you actually use them. Before-and-after photos document the work.
- 5
You pay online and we guarantee the job. You receive a digital invoice you can pay from your phone. Every repair carries the 365-Day Done Right Promise: if it fails within a year, we return at no charge.
How Much Does Gate Repair Cost in San Diego?
A typical gate repair in San Diego runs $180 to $500 before parts, depending on the type of failure. Driveway gate opener repairs usually land between $185 and $485. Gate welding jobs cost $150 to $450 depending on how many weld points need attention. Commercial gate repair starts around $250 and goes up to $800 for more complex access control or track work. Wood gate repairs fall in the $160 to $420 range, and iron and metal gate work spans $150 to $600 based on rust damage and fabrication.
What drives the price: the weight of the gate, the age and brand of the opener, whether parts are stocked on our truck or need to be ordered, and how much rust or mechanical wear we find once we open things up. To avoid overpaying, steer clear of companies that quote over the phone without seeing the gate: that number is either padded to cover unknowns or too low and built to climb once the tech arrives. Our free estimate includes a full inspection, a written diagnosis, and a fixed price you approve before work begins. Call (619) 541-7844 to schedule yours.
Our Service Area Near San Diego
Calder Gate Repair San Diego works throughout the county, from Gate Repair in Chula Vista through Gate Repair in Santee and into the backcountry. We regularly serve Lakeside, La Mesa, Jamul, Spring Valley, Winter Gardens, Solana Beach, Del Mar, Imperial Beach, and Coronado. Most San Diego-proper calls see a tech within 24 hours, and emergency calls are dispatched the same day whenever scheduling allows. If you’re outside the immediate metro area, call us and we’ll let you know the next available window before you commit to anything.
Serving San Diego, CA - Our Local Coverage Area
We’re based in the San Diego area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in San Diego
Automatic Gate Repair is the diagnosis and correction of any mechanical, electrical, or structural problem with a driveway, pedestrian, or commercial gate. That includes the gate itself, the hinges and wheels, the opener motor, the control board, remotes, keypads, safety sensors, and the access system that tells the gate when to open. Most gate repair calls in San Diego involve either a gate that won’t move, moves erratically, or won’t close properly.
Most common gate repairs, like sensor replacement, limit switch adjustment, or remote reprogramming, finish within one to two hours on site. Welding and structural repairs usually take two to four hours. If we need to order a rare part for an older opener, we’ll tell you the timeline before we leave and schedule the follow-up visit at no extra trip charge.
Gate repair in San Diego typically costs $180 to $500 before parts for common residential jobs, with commercial repairs sometimes reaching $800 depending on the system. The exact price depends on the opener brand, the age and condition of the gate, and what parts need replacing. Every job gets a written quote before work starts so the invoice never surprises you. Call (619) 541-7844 for a free estimate on your specific gate.
Yes. We’re factory-familiar with FAAC and hydraulic operators, BFT gear-driven units, Linear systems, and Viking commercial swing operators. We stock common parts for all four brands on our trucks, which means we can often complete same-day repairs without waiting on a supply order.
A live person answers our phones 24 hours a day, seven days a week. Emergency calls are dispatched the same day whenever our schedule allows, and the dispatcher will give you an honest arrival window. Non-emergency repairs can usually be scheduled within 24 hours in most San Diego neighborhoods.
Every gate repair carries the 365-Day Done Right Promise. It’s a written guarantee, stated on every job, that if the repair fails within 365 days, Calder Gate Repair San Diego returns and fixes it at no charge. That’s a full year of coverage, on every repair, for every customer. No fine print, no exclusions for normal use.
Move any vehicles blocking the gate’s full swing or slide path so we can test the complete travel. If you have remotes or keypads, gather them all so we can test and reprogram every access point. Clear the area around the opener motor and control box if possible. That’s it: we’ll handle the rest, and we’ll show you what we find before we fix it.
Schedule Your Gate Repair Service in San Diego Today
A gate that won’t close properly is a security issue that gets worse every day. Call Calder Gate Repair San Diego at (619) 541-7844 and a real person will answer, schedule your visit, and give you a written price before any work starts. Free estimates, background-checked techs, and the 365-Day Done Right Promise on every job. Serving San Diego since 2009.
Written by Nico Alvarez, Owner at Calder Gate Repair San Diego, serving San Diego since 2009.